Gunsmith Workbenches

Gunsmith Workbenches & Gunsmithing Benches

Gunsmithing demands a workbench that can take real punishment, hold its tolerances over years of use, and lock down when you walk away. Dragonfire gunsmith workbenches are built for full-time gunsmiths, FFL holders, and serious enthusiasts who care about the same things you do, flat tops that stay flat, all-welded steel frames, lockable drawers that actually deter, and integrated power right where you need it.

Below you'll find our complete gunsmithing setup: the flagship 20-drawer workbench, matching wall and locker cabinets, and accessory drawer inserts built specifically for cleaning, parts trays, and small-tool organization. Configure a single bench or build out a full gunsmithing bay, every piece is designed to integrate.

Read more: Why gunsmiths choose Dragonfire and what to look for in a gunsmithing workbench

A workbench, not a workstation

Most "gunsmith tables" you'll find online are repurposed mechanic benches with a different sticker. Ours are spec'd from the ground up for gunsmithing work: a stainless steel one-piece top that won't warp under a vise, a backsplash that contains solvents and small parts, and an all-welded frame that doesn't loosen under bench-block hammer work.

Lockable, modular, and built to integrate

Every drawer locks. Every cabinet locks. Drawers are swappable, so you can mix deep-drawer storage for receivers and barrels with shallow drawers for small parts and screwdriver bits. When you're ready to expand, the wall and locker cabinets share the same finish and lockset family, so your shop looks like one system, not five.

Integrated power for the work you actually do

Two USB ports and four outlets are built into the backsplash. That means your bore scope, soldering iron, parts tumbler, magnifying lamp, and laptop all live on the bench, with no extension cord rat's nest and no power strip dangling off the back.

Premium, not tool-truck

Snap-On and Matco are quality benches. They're also priced like tool trucks, because that's how they're sold. We're built to the same standards (heavier in some areas, lighter in others) and priced direct, not through a route truck.

How thick should a gunsmith workbench top be?

For serious gunsmithing work, look for a stainless steel one-piece top of at least 14 gauge. Wood and laminate tops will dent, warp, and absorb solvents over time. Stainless cleans up with brake cleaner and stays flat under a 6" vise.

Do I need a lockable workbench?

If you store firearms, parts, or customer guns at the bench, yes. Lockable drawers and cabinets aren't a substitute for a safe, but they're a meaningful deterrent and often required by FFL guidance for parts and works-in-progress. Every drawer on the Dragonfire workbench locks, and the matching wall and locker cabinets share the same lock keying.

What drawer configuration works best for gunsmithing?

A practical setup runs three deep drawers (10 to 12 inches) for long parts, barrels, and stock blanks; six medium drawers (4 to 6 inches) for receivers, slides, and assemblies; and the rest in shallow drawers (2 to 3 inches) for small parts, screwdriver bits, punches, and consumables. Our swappable drawer system lets you reconfigure as your work changes.

How is a gunsmith table different from a regular workbench?

A "gunsmith table" usually refers to a smaller standalone surface for cleaning or detail work. A gunsmith workbench is a full work surface with drawers, cabinets, and bench space for the entire workflow: vise work, parts management, cleaning, and finishing. Most full-time gunsmiths need the workbench, not the table.

Sort by

View as

Pro Series 18 Drawer 9FT Workbench

$5,799.00 - $6,099.00

$5,799.00

The Pro Series 18-Drawer Workbench is the ultimate solution for professionals who demand strength, flexibility, and efficiency. Featuring 18 swappa...

View full details

Pro Series 18 Drawer Workbench Package - Workbench, Wall Cabinets & Locker Cabinets

$11,799.00 - $12,399.00

$11,799.00

The Pro Series 18 Drawer Workbench Package includes a Pro Series 18 Drawer 9ft Workbench, two Pro Series Locker Cabinets, and four Pro Series Wall ...

View full details

Gun Smith Workbench Features & Benefits:

Which Gunsmithing Setup Is Right for You?

Most full-time gunsmiths land on the Pro Bench Package. Here's how to choose.

Single Bench

Best for: part-time gunsmiths, serious enthusiasts, home shops with limited space.

The Pro Series 17 or 20-Drawer Workbench gives you a full work surface, lockable drawer storage, and integrated power outlets for cleaning, inspection, and light builds.

See the 20-Drawer Workbench →

Pro Bench Package (Most Popular)

Best for: full-time gunsmiths, FFL retail shops, professional builders.

Bench plus matching wall cabinets plus locker cabinets, all integrated. Same finish, same lockset family. This is the setup most working gunsmiths land on.

See the 20-Drawer Pro Package →

Complete Gunsmith Bay

Best for: high-volume shops, custom build operations, multi-station setups.

The Pro Series 24 or 30-Drawer Workbench Package, our largest footprint with full upper and lower cabinet integration. Pair with the 56" Worktable Package as a dedicated cleaning station.

See the 30-Drawer Pro Package →

FEATURES OF A HIGH-QUALITY GUNSMITH TOOLBOX

Your armory is an investment, so maintaining it correctly is important. A professional-grade gun maintenance toolbox can mean the difference between adequate and inadequate gun maintenance. A gun toolbox can be small enough to be portable, and you can add casters to your unit to make it easier to roll around your workshop or garage. We also offer larger workbenches and tool chests with wall cabinets, drawers, and horizontal work space for cleaning and maintenance of firearms. With the workbench top being 14 gauge 304 stainless steel with wood underneath it is sturdy enough to mount a re-loader or vice to it. You can also start small with a basic unit and add to it later with more cabinets and drawers if desired.

WHAT TO LOOK FOR IN A GOOD WORKBENCH FOR GUNSMITHING

Those with sufficient floor space will appreciate having a full-size gun cleaning workbench that can hold all firearms, gear, and accessories within arm’s reach while you’re working with them. The best gun workbench will have features such as:

Industrial-strength drawers in both skinny and deep sizes
Easy-slide drawers made of 18-gauge galvanized stainless steel that will hold the heaviest gear
Drawers that open completely for full access to their contents
Roomy cabinets with adjustable shelves
Locks for both drawers and cabinets
A 14-gauge stainless steel top for gun cleaning and maintenance
Electrical outlets and USB ports
Powder-coat finish for added durability
Matching cabinet and drawer units to customize and expand your gun cleaning workbench

The stainless-steel top on each of our units is plenty strong enough to support a gun vise. Anti-slip drawer liners also add more functionality. And our products are backed by a limited lifetime warranty, which just shows how confident we are about the reliability and performance of each workbench and toolbox we sell.

Gunsmith Workbench FAQ

What's the difference between a gun workbench and a regular workbench?

A gun workbench is purpose-built for gunsmithing: stainless or steel top, lockable drawers, integrated cleaning containment, and drawer configurations sized for receivers, barrels, and small parts. A regular workbench will hold up for occasional gun work but lacks the security, drawer ergonomics, and surface durability gunsmiths need daily.

Are Dragonfire workbenches FFL-friendly?

Yes. Every drawer and cabinet locks. The wall and locker cabinets share the same lock keying. While no workbench replaces a proper safe, our lockable storage meets the working-storage practices most FFLs use for parts, customer firearms in process, and consumables.

Can I customize the drawers for gunsmithing-specific tools?

Yes. Our drawer system is fully swappable.

What finish options are available?

Workbenches come in Dark Gray (standard) or limited-run Black. Wall and locker cabinets come in Gunmetal Grey or Gloss Black powder-coated.

Do you ship to FFL addresses or commercial shops?

Yes. We ship workbenches and cabinets via freight to commercial and residential addresses. Shipping is calculated at checkout and we coordinate delivery with you directly for shop installations.

How do Dragonfire benches compare to Snap-On for gunsmithing?

Comparable build quality at materially better pricing because we sell direct rather than through tool trucks. Where Snap-On sells closed and proprietary configurations, our system is open and modular. You can reconfigure drawers and add matching cabinets as your shop grows.

Are the workbench tops really stainless steel?

Yes. Every Dragonfire workbench top is 14-gauge 304 stainless steel with a wood backing for vibration dampening and rigidity under vise mounting. The stainless cleans up with brake cleaner and won't dent, warp, or absorb solvents over time.

Not sure which setup is right? Call us at 1-888-531-7511 or email sales@dragonfiretools.com. We'll help you spec the right bench.